Progressive Dynamics PD9345V 45 Amp Battery Selectable Converter

This is the PD9345 45-amp Inteli-Power converter from Progressive dynamics. Newest advancement in RV charging features a battery selector switch with the ability to charge common battery types.

• Flooded Lead Acid (FLA)
• Absorbed Glass Material (AGM)
• Lithium Iron Phosphate (LiFePO4)
• Or you can select a fixed output of 13.6 VDC
• Selectable Charge profiles
• GFCI Protection

REVERSE BATTERY PROTECTION: prevents damage if battery leads are cross connected. Since the only consequence of cross connection is a blown fuse, damage to or possible replacement of the converter is avoided. Cross connection of battery leads is the only thing that will blow these fuses. Replacement fuses are available at any automotive store.

GENERAL OPERATION: The INTELI-POWER series converter will supply "clean" power from input voltages that range from 105-130 VAC.

CONSTANT VOLTAGE (MAGENTA LIGHT): - The full rated load is available for load, battery charging or both. When charging the battery, the converter has a nominal voltage output of 13.6 VDC.

LITHIUM W/ 2 STAGE CHARGE (BLUE LIGHT): – When charging the battery, the converter has a nominal voltage output of 14.4 VDC. When the converter senses an output current drop below a preset level, the converter will automatically switch to IDLE mode and the voltage output will drop to 13.6VDC

FLOODED LEAD ACID (GREEN LIGHT): - When charging the battery, the converter will sense voltage on the battery and automatically select the proper operating mode to provide the correct charge level to the batteries. If the voltage drops below a preset level the converter will automatically switch to BOOST mode and the output voltage will increase to approximately 14.4 VDC to rapidly recharge the battery. When the converter senses an output drop below a preset level, the converter will automatically switch to NORMAL mode and the voltage output will drop to 13.6VDC. If there is no significant battery usage for 33 hours the converter will automatically switch to STORAGE mode and the output voltage will drop to 13.2 VDC. In storage mode, the output voltage increases to 14.4 VDC for approximately 15 minutes every 21 hours to help prevent sulfation of the battery plates.

AGM (WHITE LIGHT): – When charging the battery, the converter has a nominal voltage output of 14.0 VDC. After a preset time, the converter will automatically switch to ABSORPTION mode and the voltage output will increase to 14.7VDC. When the converter senses an output current drop below a preset level, the converter will automatically switch to

A visual indicator will confirm the setting. Your selection is stored in memory, guarantying the correct charging profile every time you power up.

The fully automatic advanced multi-stage charging of our “Total Charge Management System” (TCMS) ensures an optimal charging profile for the battery type you’ve selected. The accessory port will accept the PD92201 “Charge Wizard” remote pendant for manual control of the charger when needed.

WARNING: To prevent damage to the battery, select the proper profile before connecting the battery.

Warning: Product may contain materials cautioned by California Proposition 65