Description
Introducing the PropGlide Small 250ml Kit PropGlide PCK-250 by PropGlide.
Kit Includes:
120ML Primer Base
30ML Primer Hardener
100ML Clear Topcoat
- Enhanced Fuel Efficiency: Clean props and running gear provide more efficiencies to the engine and less fuel is burned and money saved!
- Biocide-Free and Environmentally Friendly
Manufactuer's Note: This 250ML Small Kit will cover: Propellers 18-24 inches (33-60CM) with 3-4 blades and running gear.
PropGlide Small Size 250ML Kit contains 25% More Product Volume than Competitive Prop Speed Kits
PropGlide Etching Primer
Physical Properties:
- Mixing Ratio: 4 parts Primer Base (Part 1) to 1 part Primer Hardener (Part 2) by volume.
- Color: Primer Base (Part 1) is yellow; Primer Hardener (Part 2) is clear.
- Dry Film Thickness: 8 microns.
- Drying Time: 5-15 minutes touch dry (temperature dependent), 1 hour hard dry at 20°C/68°F.
- Painting Interval: Apply PropGlide® Clear TopCoat immediately after the Etching Primer becomes touch dry.
- Pot Life: 8 hours at 20°C/68°F.
PropGlide Clear Top Coat
Physical Properties:
- Binder Type: Silicone Polymer.
- Solvent: Xylene.
- Color: Clear.
- Finish: Glossy.
- Dry Time: 45 minutes touch dry, 8 hours hard dry at 20°C/68°F.
- Recommended Film Build: 75 microns per coat.
- Thinning: Not applicable.
- Clean Up: Acetone.
- Shelf Life: Unopened: 3+ years. Once opened: 12 hours.