Bob's Machine 100-205000 Convertible MJ5 2.5" or 5" setback manual jack plate :200 HP MAX - $259.99 $289.99
          be the first to write a review

ATTENTION: We are still operational and fulfilling orders.

Due to the Covid-19 outbreak there may be slight delays in shipping. 

Bob's Machine 100-205000 Convertible MJ5 2.5" or 5" setback manual jack plate :200 HP MAX

          Be the first to write a review
You Pay $259.99
$289.99 Save 10%
Free Shipping
10 In Stock!

Would you like to calculate shipping for this item?

100-205000 Convertable MJ5 2.5" or 5" setback manual jack plate :200 HP MAX by Bob's Machine. For more information, see details.

Bob’s Machine Shop’s convertible manual MJ5 jack plate is actually 4 units in one that can have a straight or negative 6 degree wedge, with options of 2.5″ or 5″ setback.

Features:
-Anodized black
-Simple 4 in 1 Conversion
-Adjustable plates turn 180 degrees and switch sides, then bolt in place.
-Overall width: 17-7/8”(45.3cm)
-Overall height:14”(35.5cm).
-2 ½“(6.3cm) of lift built in and 4”(10.1cm) of adjustable lift.
-Lifetime warranty on structure
-Made in FL, USA
-Rated for 200HP, V6 motors (if heavier use Extreme series)
-Light-weight, 20 lbs, Aircraft grade aluminum and stainless steel..
-Narrow design
-Fits V6
-Pre-drilled to fit all late model V6's.
-Can be modified to fit any size outboard

Mounting Options:
-2 1/2 inch offset no wedge
-5-inch Offset with 6-Degree Wedge
-2 1/2 inch offset no wedge
-2 1/2 inch Offset with Negative 6-Degree Wedge
-5-inch Offset No Wedge
-5-inch Offset with 6-Degree Wedge

Jacking bolts: allow motor to be moved to any height. No need to take boat out of the water.

Offset: positions motor 5 1/2 inches behind transom. This allows prop to run in cleaner water, away from the turbulence and bubbles created by the hull. This helps stop slippage of prop, and helps stop torque in steering wheel at high speeds.

Trim-In: this allows motor to be trimmed in or down 6 degrees more than if mounted flat on transom. Helps stop low speed porpoising. Balance load better.

  • Country of Origin : Made in USA
  • Color : Anodized Black
  • Dimensions : 18 × 11 × 7 in
  • H.P. : 200HP MAX
  • Warranty : Lifetime Warranty on Structure
Product Reviews
Did You Buy This Product?
Leave a Review!