Description
This is a 24V DC 500-amp remote battery switch with manual control
- 500 Amp magnetic latching switch provides high amperage switching under load, manually or from remote locations
- Manual override knob provides an added level of safety allowing control with or without power and offering LOCKED OFF capability for servicing
- LED output to remotely indicate switch state - requires optional LED
- 3∕ 8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance
- 7∕ 8" (22 mm) stud length accepts multiple cable terminals
- Label recesses for circuit identification
- Silver alloy contacts provide high reliability for switching live loads
Warning: Product may contain materials cautioned by California Proposition 65
Specifications
| Amp Operating Current | (when changing state): <4A (40 ms) |
| Cable Size to Meet Ratings | 2x (4/0) |
| Coil Function | Bi-Stable |
| Continuous Rating | 500A |
| Control Circuit Connection | Tinned Wire |
| Control Circuit Voltage | 18-32V DC |
| Cranking Rating (30 sec) | 1450A DC |
| Intermittent Rating | 700A (5 min) |
| Live Current Switching | 300A @ 12V DC 10,000 Cycles |
| Manual Control | Yes |
| Master Control Capability | No |
| Max. Operating Temperature | 60° C |
| Mechanical Endurance | 100,000 Cycles |
| Min. Operating Temperature | -10° C |
| Mounting | #10 |
| Nominal Voltage | 24V DC |
| Operating Current | 0mA @ 25°C nominal VDC |
| Terminal Ring Dia. Clearance | 1.18in (29.97 mm) |
| Terminal Stud Length | 0.875in (22.23 mm) |
| Terminal Stud Size | 3/8" - 16 (M10) |
| Terminal Stud Torque | 140 in-lb (15.82 Nm) |