The ME Series Inverter / Charger from Magnum Energy is a modified sine wave inverter designed specifically for rugged mobile applications. The ME Series can be installed in four easy steps: simply connect the inverter's output to your distribution circuits or electrical panel, connect your shore power cable (AC) to the inverter's easy-to-reach terminal block, connect the batteries, and switch on the power. The ME2012-20B comes equipped with a 100 amp Power Factor Corrected charger, conformal coating on the PC boards, stainless steel fasteners and dual AC 20 amp breakers.
Features:
- The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
- Multiple ports, including an RS485 communication port for network expansion, and a remote port.
- Accessible design: The extra large AC access cover with terminal screw block and 360 degree DC connection terminals with covers make this inverter more accessible when it needs to be.
- Convenient switches: This comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
- Expanded transfer relay: 60 Amp transfer service is available and can be wired in three ways, including single in / single out, single in / dual out, or dual in / dual out.
- 1 msec surge current (amps AC): 60
- 100 msec surge current (amps AC): 37
- 5 sec surge power (real watts): 3700
- 30 sec surge power (real watts): 3450
- 5 min surge power (real watts): 3100
- 30 min surge power (real watts): 2400
- Continuous power output at 45 C: 2000 VA
- Continuous output at 45 C: 100 ADC
- Input current at rated output (AC amps): 15 GENERAL FEATURES AND CAPABILITIES
- Five stage charging capability
- Battery temperature compensation: Yes, 15 ft Battery Temp Sensor standard
- Internal cooling: 0 to 120 cfm variable speed drive using dual 92mm brushless DC fans
- Overcurrent protection: Yes, with two overlapping circuits
- Overtemperature protection: Yes on transformer, MOSFETS, and battery
- Conformal coating on PCB's for corrosion protection: Yes
- Powder coated chassis & top for corrosion protection: Yes
- Listings: ETL Listed to UL/cUL 458, CSA C22.2 #107.1-01
- Warranty: Three years
- Mounting: Shelf (top or bottom up) or bulkhead (vents up)
