This product replaces PCU1260
This is the second generation updated line of Marine Grade, Power Factor Corrected Battery Chargers that set a new standard of what you should expect from your battery charger. When it comes to features, performance & price, this is the product you are looking for. This exceptionally efficient power factor corrected battery charger runs on any Global AC Power source between 80-270 volts, requires less input power, produces less heat and noise waste, while still retaining a remarkably small, lightweight footprint. Did we mention Eleven pre-programmed battery charging curves as well as 4 user customizable battery profile for Lead Acid or Lithium Batteries Adjust absorption time and custom set charge, float voltages and temp trip protection. Optional BMS signal & optimal positive signal feed to bring all the custom settings you need to your next project. The digital display allows easy checking of real time voltage or current output on the face of the charger or use the optional multi-lingual remote control that can be either surface, recess, or flush mounted over 30 feet away from the battery charger.
The ProCharge Ultra has been recently Updated to a 2nd Generation. The ProCharge Ultra Plus, this model has new features:
- 11 pre-programmed battery curves including: Open/Sealed lead acid, AGM, Gel, LiFePO4.
- 1 custom set, can be set from charger, unlike our competitors there is no need for a computer to do this operation, all can be done from the front panel.
- 2 x digital meters for current and voltage measurement and a 32 LED information display.
- 1 x power meter to show what reserve power left in the unit.
- PFC, active, up to 0.99 PF, ensuring efficient power conversion, up to almost 90% as opposed to about 60% for older, non-PFC technology.
- % power reduction to allow unit to work with restricted power available (available on local control or remote control panel).
- De-sulphation auto cycle built in to software.
- New, low activity, standby mode to increase battery life.Battery health program every 7-10 days .
- Multiple speed fan control. This reduces unnecessary fan noise experienced by the customer, even though the new extreme efficiency reduces the need for fans. At high ambient temperatures (40-50 deg C), however, fans would still be required to ensure operation.
- Primary (processor digitally controlled) and an emergency backup secondary (analogue controlled) high voltage trip.
- 32 LED information panel to ensure maximum information transmitted to owner.
- Internal scan and systems check to ensure product is okay.
- Remote control option.
- Small footprint and light weight.
- Include battery temperature sensor to give temperature compensation and high temp trip.
- As with all our marine chargers all metals used are non-ferrous or heavily protected, so no corrosion.
- New synchronized rectification output as opposed to diode output, giving up to an extra 9% efficiency.
- Conforms to ABYC drip test, is waterproof from water directly dropped on to the top of the unit (+/ - 17 deg) if installed correctly (vertically).
- Thermostatically controlled force draft cooling.
- The printed circuit boards are conformal coated for high humidity and salt air operations.
Warning: Product may contain materials cautioned by California Proposition 65
