-
POWERFUL COMPACT AND BE USED TO STEP UP, STEP DOWN OR AS A BALANCING TRANSFORMER
-
STEP UP: ALLOWS YOU TO POWER 240 VAC LOADS FROM A SINGLE 120 VAC INVERTER / CHARGER-THIS IS TYPICALLY DONE FOR POWERING DEEP WELL PUMPS OR OTHER DEDICATED HIGH POWER LOADS
-
STEP DOWN: ALLOWS YOU TO CONNECT A LARGE 120 VAC LOAD TO THE OUTPUT OF A STACKED PAIR OF DR OR SW INVERTERS (120 / 240 VAC) RESULTING IN THE INVERTERS SHARING THE LOAD ALLOWING HIGHER PERFORMANCE AND EFFICIENCY
-
BALANCING TRANSFORMER: ALLOWS A SINGLE 120 VAC INVERTER TO BE CONNECTED TO A GENERATOR WHICH HAS 240 VAC OUTPUT. KEEPS THE GENERATOR BALANCED FOR BETTER PERFORMANCE AND OPERATING LIFE
-
POWDER COATED ENCLOSURE WITH KNOCKOUTS FOR CONDUIT CONNECTORS
-
TWO POLE 25 A CIRCUIT BREAKER / DISCONNECT
-
AC INPUT / OUTPUT VOLTAGE: 120 / 240 VAC + / - 10% AT 60 Hz
-
CONTINUOUS POWER AT 25 DEGREES C: 3900 VA
-
IDLE CONSUMPTION: 12 WATTS
-
INSERTION LOSS: LESS THAN 4 VAC AT 3900 VA
-
INPUT / OUTPUT AC BREAKER RATING: 25 A 2 POLE SQUARE-D QOU BRANCH CIRCUIT RATED / 10,000 AIC
-
HOOK UP WIRE SIZE:14 AWG TO 2AWG
-
HOOKUP ACCESS: ¾” AND 1” KNOCKOUTS
-
ENCLOSURE TYPE INDOOR, VENTILATED, STEEL CHASSIS WITH POWDERCOAT FINISH
-
DIMENSIONS: 6.3”H X 21”W X 7”D
-
WEIGHT: 40 LBS
-
WARRANTY: 2 YEARS
-
UL APPROVED
&
